Infra-QSources sound sources

Qsources has developing and producing sound sources, shakers, sensors, etc. from 1992 onwards:
  • Some Qsources products have become the standard equipment for specilized NVH tests in the automotive industry world wide.
  • Building-acoustics sound sources which are by far the lightest on the market, with a performance level exceeding others.
Specialization and fast innovation has lead to proprietary and patented technologies in QSources products:
  • Efficient and powerful Lorenz drive systems in shakers and sound sources
  • Fully integrated high resolution sensors in sources and shakers
  • Unique self-suspending shakers with 6 degrees of freedom decoupling suspension systems
  • Power flow sensing for fast acting overload protection for sources and shakers

Qohm

The latest generation 4 inch drivers has now been built into the new Qohm sources. The weight is further down to 3.1 Kg.  The specification level is increased also; bringing the sound power level up to 123 dB Lw, and the 50 Hz band level up to 98 dB Lw which is the highest seen in the industry.

Qohm72

​High sound pressure levels for large site testing, and still single person portable. This source with a weight of 19.4 kg is capable of producing 140 dB Lw pink noise.


​​

Qam
Measurement power amplifier

High power and light weight measurement amplifier, combining 2.3 kg weight weight with 800 Watt output in a small robust housing. The amplifier is DSP controlled, with a very straightforward operation. Included is a white/pink noise signal generator. ​​​

NEW   Qohm2
monopole omni-directional source

Precision 3D omni-directionallity horizontal and vertical. Broadband operation from 50 to 16000 Hz possible. Small and light weight at 1.3 kg only.
High output sound power up to Lw 108 dB pink noise. Over-load and over-temperature protected
To be combined Qca and Qam measurement amplifiers

NEW   Qref 
​Omni-directional power reference source

​Precision omni-directionallity semi-free-field, horizontal and vertical in the 50 to 5000 Hz third octave bands. Small and light weight at 0.8 kg only. Extremely stable and high output sound power at Lw 97 dB. Can be used in calibrated fixed output level mode and in a free-signal mode using the power proportional output ref. signal.
Supplied as a set with a dedicated QamR amplifier. Each unit delivered with an accredited calibration (ISO 9626)